Suspension Leveling and Mild Kits are one of the most popular aftermarket products for Toyota truck owners. Leveling systems not only transform trucks like the Tacoma into taller, better looking vehicle, but they also provide a more commanding view of the road. Mild kits from ReadyLift® Suspension Inc., the leader in suspension leveling systems, are the most economical and safe method of altering vehicle ride height, which also allows the consumer to upgrade his tires to a preferred larger size. Nothing looks better than a truck fit with an aggressive stance and that is exactly what ReadyLift® Smart Suspension Systems (SST) provide!
ReadyLIFT® Suspension Inc. has used their proven technological engineering methods to produce a SST Suspension Lift System for the 2005-2013 Six-Lug Toyota Tacoma trucks (P/N 69-5055) that lifts the truck 2.75″-3.0″. The intermediate Smart Strut Technology system fits all 2005-10 Tacoma and Prerunner models including both 2WD and 4WD models. This kit provides the owner with the opportunity to upgrade to larger wheel and tire combinations up to 33-inches in diameter while retaining the great stock ride and handling characteristics. 32.5″ tire diameter is recommended. In order to fit 33″ tires you will have to do some minor trimming of the inner fenderwell.
NOTE: Our objective is to have your truck sit level or slightly below level. Each truck is different so the amount of lift achieved may vary between 2.75″ and 3.0″ in the front. TRD-equipped trucks often have less rake compared to a non-TRD truck. Measurements on some customer’s trucks have revealed as much as 1.0” difference in the factory front end height. To compensate for the rake difference on TRD trucks, we recommend using ReadyLIFT 2.25″ Front Leveling Kit and ReadyLIFT 1.0″ rear block Kit for a stance that is closer to level when lifted both front and rear.
NOTE: 2011-2013 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2013 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.
* Note: 2013 Tacoma TRD models require purchase of Sway Bar Relocation bracket.
ReadyLift™ Features & Benefits
- Will never wear, break or fail – Guaranteed
- Toughest finish – Guaranteed
- Safest way to lift – Guaranteed
- Maintains your factory ride — Guaranteed
- 2005-2012 Toyota Tacoma 2wd 6-Lug & 4wd